Spill Absorbent Powder

With loose granular Spillxorb absorbents in your arsenal, say goodbye to mops and brooms! Made from coconut husks, this spill-absorbent powder is completely natural, sustainable, and organic. The tiny-sized coconut particles found in this granular spill absorbent soak up all of the spills leaving the floor completely clear and stain-free. 

So what’s the wait for? If you’re looking for the best granular absorbent then stop the wait and check out spillxorb’s granular absorbent today!

Book Now
Spill Absorbent Powder
Products

Discover our products

5L Absorbent Jar
05 Litre Granular Absorbent Jar
2L Absorbent Jar
02 Litre Granular Absorbent Jar
Granular Absorbent Jar 3L
Granular Shaker Jar - 3 Litre
50L Absorbent Bag
50 Litre Granular Absorbents Bag
Products

Product categories

50L Absorbent Bag

Granular Oil Absorbent

Our granular oil absorbent does wonders for any type of oil spill! Simply pour the absorbent powder over the oil spill, give it some time, and viola! Your floor is oil-free and clean. Cleaning up the residue is also hassle-free, as spillxorb’s oil-based spill absorbent powder leaves behind no traces of the residue, just one sweep, and the floor’s clean! 

View Product
50L Absorbent Bag

Chemical Absorbent Powder

When chemical spills are ruing your floor, your best bet will be on Spillxorb’s Chemical Based Spill Absorbent Powder to save your day! Formulated to tackle any type of chemical spill you may face, this wonder granular spill absorbent can absorb it on touch! Just pour it over your chemical spill, wait for 15 to 20 minutes, and wipe it!

View Product

Why to Use Spill Absorbent Powder?

Spillxorb’s Granular absorbents are made with meticulous care and with the best spill absorbent powder to quickly deal with all kinds of spills. From have you covered and offer you a hassle-free experience. Since they are made from coconut husks, our loose granular absorbent is lighter than clay and many other absorbent granules, making it easier and safer for us.

Premium absorbent made of 100% recycled material

Safe, non-toxic, silica-dust free

Instant spill cleanup

Environmental Friendly

Pet and Human Safe

Non Abrasive

Non Carcinogenic

Biodegradable

Step By Step Process for Oil Spill Removal

Here’s a step-by-step guide on how you can remove oil stains from the floor using spill-absorbent powder.

  1. Contain the spill using an spill absorbent sock and blob the spill to absorb most of the spill
  2. Once the oil is contained and the stain absorbed, add the contents of Spillxorb’s spill absorbent bag into the remaining spill.
  3. Allow the granular absorbent powder to rest on the spill for 15-20 minutes to ensure the absorbing process is completely efficient.
  4. Once the 20 minutes are up, use a broom or sweeper, sweep the mix of absorbent and spill, and clean the area, if you’re using spill control products, the floor will be clean and good as new, that’s guaranteed! 
  5. If there’s any residual oil, create a cleaning solution with warm water and a few drops of dish soap. Dip your microfiber cloth in the solution and wring it out thoroughly (the cloth should be damp, not soaking). Wipe the affected area to remove any remaining oil residue.
  6. If necessary, rinse the cleaned area with clean water and a fresh microfiber cloth to remove any soap residue.
STEP BY STEP PROCESS FOR OIL SPILL REMOVAL
STEP BY STEP PROCESS FOR Chemical SPILL REMOVAL

Step By Step Process for Chemical Spill Removal

  1. the spill using an absorbent boom sock and blob the coolant spill to absorb most of it.
  2. Once the coolant is contained and the coolant stain is absorbed, add the contents of spillxorb’s spill absorbent bag to the remaining spill.
  3. Allow the absorbent to rest on the spill for 15-20 minutes to ensure the absorbing process is completely efficient.
  4. Once the 20 minutes are up, use a broom or sweeper, sweep the mix of absorbent and the coolant, and clean the area. If you’re using spillxorb products, the floor will be clean and as good as new, that’s guaranteed! 
  5. If there’s any residual oil, create a cleaning solution with warm water and a few drops of dish soap. Dip your microfiber cloth in the solution and wring it out thoroughly (the cloth should be damp, not soaking). Wipe the affected area to remove any remaining oil residue.
  6. If necessary, rinse the cleaned area with clean water and a fresh microfiber cloth to remove any soap residue.